Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating the product
5.7 Warning symbols
C
Warning symbols may vary
depending on the model of your
machine.
Fibre filter cleaning
When the program is completed, the warning
symbol for filter cleaning turns on.
C
For detailed information, See 6
Maintenance and cleaning.
C
If filter cleaning symbol constantly
flashes See.7 Troubleshooting.
Emptying the water tank
When the program is completed, the warning
symbol to empty the water tank turns on.
C
For detailed information, See 6
Maintenance and cleaning.
If the water tank fills up while the program
continues, the warning symbol starts flash-
ing and the machine goes into stand-by. In
this case, empty the water tank and start
the program by pressing the Start / Stand-by
button. Warning symbol turns off and pro-
gram resumes.
Cleaning the filter drawer
Warning symbol flashes periodically to re-
mind that filter drawer must be cleaned.
C
For detailed information, See 6
Maintenance and cleaning.
Dryer / User Manual
Loading cover is open
If loading cover of the dryer is open while
drying, Stand-by symbol turns on and pro-
gram progress symbol flashes.
End time
You can delay the end time of the program up
to 24 hours with end time function.
• Open the loading door and place the
laundry.
• Select drying program, spin cycle and if
needed, additional functions.
• Press the End Time selection button and
set the delay time you wish. End Time
symbol turns on. (When pressed and
hold the button, End Time proceeds non-
stop).
• Press the Start / Stand-by button. End
time countdown starts and Start symbol
turns on. ":" Separator in the middle of
displayed delay time flashes.
C
You can add or remove laundry
within end time. End Time
symbol will turn off at the end
of countdown, drying starts and
duration of program is displayed.
Displayed time is the sum of
normal drying time and end time.
55 / EN
Werbung
