Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A wide fan-shaped stream of water will distribute the water jet over a larger area,
providing excellent cleaning performance with a reduced risk of surface damage.
Large areas can be cleaned faster with a wide range of options.
NOZZLE CLEANING INSTRUCTIONS
Clogging or partial clogging of the nozzle can significantly reduce water flow and
cause the unit to pulsate while spraying. To clean the nozzle:
• Turn off the device and disconnect it from the power supply.
• Close the water supply. Relieve the pressure from the hose by squeezing the
trigger 2-3 times.
• Disconnect the tip from the gun.
• Rotate the nozzle to a position that produces a narrow spray pattern.
• Using the included tip cleaning tool or an unfolded paper clip, insert the wire into
the nozzle opening and move it back and forth until the debris is removed (see fig.
6).
Figure 6 - Insert the tip cleaning tool into the nozzle opening and move it back and
• Remove additional contamination by backwashing the nozzle with water. To do this,
touch the end of the garden hose (with running water) and the tip of the nozzle for
30-60 seconds.
Figure 5 - Wide stream
forth until the debris is removed
Werbung
