BASETech 2524385 Bedienungsanleitung Seite 34

Problem
No drilling progress is evident when drill-
ing, the drill will not enter the workpiece.
The cordless screw driller rattles when
loosening or tightening a screw or when
drilling.
The drill chuck turns too slowly or too fast.
The drill chuck turns, but the drill (or a bit
for screwing) does not (tool slips).
The motor stops after brief operation.
10. Maintenance and Cleaning
• The product has no parts that require maintenance by you. Therefore, never open/disassemble it. Maintenance
or repair and opening of the product in this context must only be performed by a specialist or suitable specialist
workshop.
• Before servicing or cleaning the rechargeable battery, remove the rechargeable battery from the cordless screw
driller; pull the plug-in mains adapter from the mains socket.
• Careful cleaning maintains the product's function to give you joy in using it for a long time. A good craftsman takes
care of his tools!
Remove dust with a clean long-haired brush and a vacuum cleaner. Dust may also be removed with compressed
air.
A dry, clean and lint-free cloth is sufficient for cleaning the outside of the product.
Do not use any aggressive cleaning agents or chemicals. Unsuitable cleaning agents may cause discol-
ourations of the plastic surface or damage the label. Also never use any abrasives, alcohol, gasoline, spirit
or similar liquids for cleaning!
34
Solution aid
• Check the rotating direction of the drill, switch the rotating direc-
tion switch to the other position.
• Use a new, sharp drill.
• Use a drill that is suitable for the material into which you want to
drill a hole (wood/metal drill).
• Adjust the torque setting ring so that a higher torque is available
for tightening the screw.
• When drilling holes, use the position with the drill symbol on the
torque setting ring.
• Check the setting of the slider for the two-speed gear.
• Check if the drill chuck is tightened.
• The clamping area of the drill chuck is too small. Push the tool
more deeply into the drill chuck.
• The rechargeable battery is discharged. Recharge the recharge-
able battery again or insert a replacement rechargeable battery
of the same build.