Maintenance; Replace Wheel - HOLZMANN-MASCHINEN BSG 13E Betriebsanleitung

MAINTENANCE

12 MAINTENANCE
The machine is low maintenance and contains little parts that must undergo a maintenance
operator.
The elimination of defects does your dealer
Follow all of the conversion work in isolation from the mains!

12.1.1 Replace wheel

ATTENTION: Use the adherence of the grinding wheel suitable safety gloves.
Remove Unscrew the guide bracket (11) and the sanding dust cover (8).
With the Allen key Allen key to loosen the screw and remove the wheel.
Make sure that your machine and clean it regularly to get a long-lasting effectiveness and
efficiency.
Only use a warm damp cloth and a soft brush to clean your machine.
Do not use detergents or solvents as these could cause irreparable damage to your machine.
Chemicals can damage the plastic parts.
Store the unit in a dry place. Stored on the device for longer retention periods in a dry place.
Allow the unit to cool before you store it.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 29
BSG 13E