Function Description - Jinbei EL-300 Anleitung

Switching On / Off
1 . AC Power:
Insert the plug of the power
adapter into the power socket
[13] and connect the unit to
the power. Press and hold the
on/off switch [12] to switch on
the unit. The power symbol
[18] is displayed in the LC
display.
Adjusting the Brightness
Turn the function button [10] to adjust the brightness. The brightness
range can be set between 1% and 100%, "--" means that the LED LED
continuous light is switched off.
Fan Control
Press and hold the light effect pause / light effect replay button [14] |
fan switch [7], the fan switches on and the LC display shows the fan
symbol [24].
Note: After the fan has been switched off, the brightness is is auto-
matically turned back to 30% of the original brightness.

Function Description

25