Soundeffects - Beko B55L 5531 4B2 Bedienungsanleitung

PICTURE /SOUND SETTINGS

Soundeffects

This menu offers three preset sound effects
(Music, Natural and Speech) and one setting to
be created by you (User).
1 Select the line »Sound Preset« with »
» «.
Λ
2 Select the sound effect »Music«, »Natural«
or »Speech« by pressing »
Note:
»User« option is active when »Sound
7
mode« setting is selected as »Normal or
»Spatial«.
Automatic volume
Television stations broadcast at different
volumes. The automatic volume limiting (AVL)
function means the volume is kept the same
when you switch between channels.
1 Select the line »AVL« with »
select the option »On« with »
Note:
If the »DTS TSHD« setting has been selected
7
in the »Sound Mode« line, the AVL line
cannot be selected.
Equalizer
Equalizer offers a sound setting "User" that you
can create.
Equaliser appears in the menu when »Sound
mode« is selected as »Spatial« or »Normal«,
and »Sound Preset« as »User«.
1 Select »Equalizer« with »
press »OK« to confirm.
The »Equalizer« menu appears.
Note:
If the »DTS TSHD« setting has been selected
7
in the »Sound Mode« line, the »Equalizer«
line will not indicate.
2 Select the frequency bandwidth »120Hz«
with » « or » «.
V Λ
Set the preferred value with »
3 Set the next frequency bandwidth with »
or » « and repeat the setting.
Λ
4 Press »BACK < « to save the setting.
Television / User Manual
« or
V
< >
« or » «.
« or » « and
V Λ
< >
« or » «.
« or » « and
V Λ
< >
« or » «.
«
V
-----------------------------------------------------------
Exiting the setting
1 Press »MENU« to end the setting.
EN 80 / 27