Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Part Description
1. Misting Board
2. Front Grill
3. Misting Board Lock Screws
4. Blade Lock Nut
5. Blades
6. Grill Lock Nut
7. Back Grill
8. Motor Shaft
9. Motor Cover
10. Oscillation Button
11. Grill Lock Nut
12. Grill Ring
13. Motor Holder
14.Connection Holder
15. Main Holder
16. Holder Fixed Screw
17. Main Body
18. Water Tank
19. Water Outlet Lock nut
20. Base
21. Base Lock Net
22. Wheels
23. Misting Tube
24. Control Panel
25. Decorate Panel
26. Water Indicator
Assemble
• Insert the connecting wire and the post into the main unit then tighten the fastening knob ensure to drive the screw into
the positioning hole.
• Press the wheels into the base.
•Put holder fixed screw through the base, and fix the base to the main unit bottom.
• Mount the rear grill, grill nut, blade, blade nut and net clamp.
•Press the misting board into the corrugated hose, and fix the misting board with screws on the front grill.
• Mount the front grill into the net clamp, screw in the net clamp and then tighten the screws. Mount the corrugated hose
on the top of the main unit.
INSTRUCTIONS FOR USE
•ON/OFF(POWER)
function. Press the button to position
• SPEED : 0 - OFF, 1 - Low, 2 - Medium, 3 - High
• TIMER
: When the unit is operating, you can set the timer to switch the fan off automatically after the set time. Press
the timer button repeatedly to select the desired time period from 0 - 120 minutes.
• MIST
: Rotate the ON/OFF swich to the desired, then select the desired level of mist.
• Oscilation: Press the oscillation button (10) to activate the automatic oscillation from right to left. Handup the oscillation
button (10), the oscillation will be stop.
TIMER
MEDIUM
MIST
Humidify function
• Remove the water tank from the host, and unscrew the water tank cap counter-clockwise.
• Fill the water tank with cold water (The water must not be warmer than 40° C.), tighten the water tank cap and check for
leakage.
: Press the button to position
, the fan will be power off.
Control panel
, the fan will be power on. It can select the speed and mist
POWER ON

POWER OFF

OFF
LOW
HIGH
39

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Globo 0426

Inhaltsverzeichnis