Efapel 21311 Bedienungsanleitung Seite 12

PROG. + STANDBY - Programming deletion (only for General Blinds
Control)
Press simultaneously the PROG. and STANDBY keys for 5 seconds until the
LED start blinking. Press the desired function (
or ).
Programming of the IR Remote Control Transmitter Multifunctions
Press the or , key until the corresponding LED starts to blink. Press on
the IR Transmitter the corresponding button. The LED goes off and the
command will be programmed. To deprogram proceed in the same way.
CHARACTERISTICS
100 V ~ - 240 VA; 240 V ~ - 500 VA; 50/60 Hz
Consumption: < 0,5 W
Standby consumption: < 0,15 W
Local command or remote control by the Infrared Remote Control
Transmitter Multifunctions (Ref. 81900).
Battery back up: 24 hours*
It allows to receive sensors signals 100 - 240 V ~ (PR1 and PR2)*
2 programming functions (up or down)*
"STANDBY" function*
* Only for the General Blinds Control
12