Additional Safety Instructions - Robust RB-CD 18 Li Originalbetriebsanleitung

Vorschau ausblenden

Inhalt

Seite von 53

/ 53
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

accidents.

d) Remove keys and wrenches before swit-

ching on the electric tool. A tool or key

which comes into contact with rotating parts

of the appliance can lead to injuries.

e) Avoid abnormal working postures. Make

sure you stand squarely and keep your

balance at all times. In this way, you can

control the electric tool better in unexpected

circumstances.

Wear suitable work clothes. Do not wear

loose clothing or jewellery. Keep hair, clo-

thes and gloves away from moving parts.

Loose clothing, jewellery or long hair can get

trapped in moving parts.

g) If vacuuming devices and draining de-

vices can be ﬁ tted, make sure that these

are correctly attached and correctly used.

The use of a dust extraction system can redu-

ce the danger posed by dust.

4. Usage and treatment of the electric tool

a) Do not overload the appliance. Use the

correct tool for your work. You will be able

to work better and more safely within the gi-

ven performance boundaries.

b) Do not use an electric tool with a defec-

tive switch. An electric tool that cannot be

switched on or oﬀ is dangerous and must be

repaired.

c) Pull the plug out of the socket and/or

remove the battery before making any ad-

justments to the appliance, changing ac-

cessories or put the appliance down. This

safety measure prevents starting the electric

tool unintentionally.

d) Keep unused electric tools out of the

reach of children. Do not allow people

who are not familiar with the appliance or

who have not read these instructions to

use the appliance. Electric tools are dange-

rous if they are used by inexperienced people.

e) Clean your electric tool carefully. Check

whether moving parts are functioning

properly and not jamming, whether parts

are broken or damaged enough that the

functioning of this electric tool is aﬀ ec-

ted. Have damaged parts repaired before

using the appliance. Many accidents are

caused by badly maintained electric tools.

Keep your cutting tools sharp and clean.

Carefully maintained cutting tools with sharp

cutting edges will jam less and are easier to

control.

g) Make sure to use electric tools, accesso-

Anl_RB_CD_18_Li_SPK7.indb 16

ries, attachments, etc. in accordance with

these instructions. Take the conditions in

your work area and the job in hand into

account. Using electric tools for any purpose

other than the one for which they are intended

can lead to dangerous situations.

5. Using and handling the cordless tool

a) Only charge the batteries in chargers that

are recommended by the manufacturer.

A charger that is designed for a certain type

of battery may pose a ﬁ re risk if it is used with

other types of battery.

b) Use only the correct batteries in the elec-

tric tools. The use of other batteries may

result in injuries and a ﬁ re risk.

c) Keep unused batteries away from paper

clips, coins, keys, nails, screws and other

metallic objects that could cause a short

circuit between the contacts. A short cir-

cuit between the battery contacts may cause

burns or a ﬁ re.

d) In case of incorrect use, ﬂ uid may escape

from the battery. Avoid contact with it. If

you touch it by accident, rinse the aﬀ ec-

ted area with water. If you get the ﬂ uid

in your eyes, also seek medical advice.

Leaking battery ﬂ uid can cause skin irritation

or burns.

6. Service

a) Have your electric tool repaired only by

trained personnel using only genuine

spare parts. This will ensure that your elec-

tric tool remains safe to use.

Hold the equipment by the insulated handles

when carrying out work during which the

screw or the plug-in tool could strike con-

cealed power cables. Contact with a live cable

may also make the metal parts of the equipment

live and cause an electric shock.