Mechanical Fret Saw Dsh; General Safety Information; Safe Working - Proxxon DSH Handbuch

GB
Contents
1 Mechanical fret saw DSH . . . . . . . . . . . . . . . . .12
2 General Safety Information: . . . . . . . . . . . . . . . .12
3 Legend (fig. 1) . . . . . . . . . . . . . . . . . . . . . .13
4 Description of machine (also see fig. 1a and 1b) . . . . .13
5 Technical data . . . . . . . . . . . . . . . . . . . . . .14
6 Set-up and commissioning of the saw: . . . . . . . . . .14
6.1 Unpacking (fig. 1a and 1b): . . . . . . . . . . . . . . . .14
6.2 Setting up the saw: . . . . . . . . . . . . . . . . . . . .14
6.3 Adjust and set angle display (fig. 2):
6.4 Assembling the air nozzle (fig. 3): . . . . . . . . . . . . .14
6.5 Connecting the vacuum cleaner (fig. 4): . . . . . . . . . .15
6.6 Saw blades . . . . . . . . . . . . . . . . . . . . . . . .15
6.6.1 Clamping in the saw blade (fig. 5a and 5b): . . . . . . . .15
6.6.1.1 Saw blades with cross pin (fig. 5a). . . . . . . . . . . . .15
6.6.1.2 Saw blades with flat ends
(hand or leaf saw blades, see fig. 5b):

1 Mechanical fret saw DSH:

Dear customer!
Using these instructions
• makes it easier to get familiar with the device
• prevents malfunctions caused by improper handling, and
• lengthens the service life of your device.
Please keep these instructions readily accessible at all times.
Use the device only when you have understood it exactly and always
adhere to the instructions.
PROXXON is not liable for the safe functioning of the device in cases
of:
• handling that does not conform to the usual usage,
• purposes of use not designated in the instructions,
• disregard of the safety instructions.
You are not entitled to guarantee claims in cases of:
• operator errors,
• inadequate maintenance.
For your own safety, please follow the safety instructions exactly.
Use only genuine PROXXON replacement parts.
We reserve the right to make improvements in the sense of techni-
cal progress. We wish you much success with the device.

2 General Safety Information:

CAUTION! When using electric power tools, the following safe-
ty measures must be observed for protection from electric
shock, risk of injury, and fire hazards.
- 12 -
. . . . . . . . . . .14
. . . . . . . . . .15
6.6.2 Finely setting the correct saw tensioning (fig. 6): . . . . .15
6.6.3 Removing saw blade (fig. 5a and 5b): . . . . . . . . . . .15
6.6.3.1 Saw blades with cross pin (fig. 5a): . . . . . . . . . . . .15
6.6.3.2 Saw blades with flats ends (fig. 5b):
7 Working with the saw: . . . . . . . . . . . . . . . . . .16
7.1 General information for working with mechanical fret saw: .16
7.1.1 Selecting the saw blade: . . . . . . . . . . . . . . . . .16
7.1.2 Selecting the speed: . . . . . . . . . . . . . . . . . . .16
7.1.3 Possible causes of faults: . . . . . . . . . . . . . . . . .16
7.1.3.1 Set saw blade alignment (fig. 2)
7.2 Sawing (fig. 7) . . . . . . . . . . . . . . . . . . . . . .16
7.2.1 Inside cuts (fig. 8) . . . . . . . . . . . . . . . . . . . . .16
7.2.2 Grain cuts: . . . . . . . . . . . . . . . . . . . . . . . .17
8 Service and maintenance . . . . . . . . . . . . . . . . .17
9 Disposal . . . . . . . . . . . . . . . . . . . . . . . . .17
10 EU declaration of conformity: . . . . . . . . . . . . . . .17
Read and take note of all these instructions before you start
up the product. Keep these safety instructions in a safe place.

Safe working

Always keep your working area tidy.
1. Disorder in the working area can lead to accidents.
Take account of surrounding influences.
1. Do not expose tools to the rain.
2. Do not use tools in damp or wet surroundings.
3. Ensure that the lighting is good.
4. Do not use tools in the vicinity of combustible liquids or gases.
Protect yourself from electric shocks.
1. Avoid body parts from coming into contact with earthed parts.
Keep other people away.
1. Do not let other people, especially children, touch the tool or the
cable. Keep them well away from the working area.
Keep unused tools in a safe place.
1. Unused equipment should be kept in a dry, closed location out
of the reach of children.
Do not overload your tool.
1. You will be able to work better and safer within the given power
range.
Always use the correct tool.
1. Do not use low power machines for heavy work.
. . . . . . . . . . .15
. . . . . . . . . . . . .16