Herunterladen Diese Seite drucken

Werbung

Look at Me
With Frame
CL/08.09.070.21 - CL/08.09.070.20
Montage instructies
Installation instructions
Notice de montage
Montageanweisungen
REV 01
28.04.2020

Werbung

loading

Inhaltszusammenfassung für Clou Look at Me CL/08.09.070.21

  • Seite 1 Look at Me With Frame CL/08.09.070.21 - CL/08.09.070.20 Montage instructies Installation instructions Notice de montage Montageanweisungen REV 01 28.04.2020...
  • Seite 2 - Clou b.v. can not be held responsible for - Clou b.v. kan niet verantwoordelijk worden the results of improper use, improper gesteld voor de gevolgen van onaangepast...
  • Seite 3 éventuellement Für andere Wände ist die verwendeten consolider le mur si nécessaire. regelnmittel an eigener Verantwortlichkeit, - Clou se réserve le droit pour tout und die Wand konnte Verstärkung changement technique ou optique par benötigen. rapport à la photo représentant le produit.
  • Seite 4 Gegenstände auf das Produkt passend ist. Gebruiksvoorschriften: zie ook de onderhoudsvoorschriften op www.clou.nl User’s instructions: See also the maintenance guides at www.clou.nl max. Instructions d’utilisation: Voyer aussi les instructions de maintenance sur www.clou.nl 15 kg Gebrauchsanweisungen: Sehen Sie auch die Wartungsanweisungen am www.clou.nl...
  • Seite 6 With Frame CL/08.09.070.21 - CL/08.09.070.20 100 100 norm. 690 max. 710 min. 590 Dimensions in mm, for reference only / 28.04.2020 / rev_01...
  • Seite 7 Neem het planchet uit het frame en de bevestigingsset van de achterkant van de spiegel. Take the shelf out of the frame and the mounting set from the back of the mirror. Sorter la tablette du cadre et retirer le sachet à l’arrière du miroir contenant le kit de montage.
  • Seite 8 Duidt met potlood en waterpas de gewenste hoogte Y van de spiegel aan. (aangeraden: Y = 1900 mm) Mark with pencil and level the prefered height Y of the mirror. (recommended: Y = 1900 mm) Marquer avec un crayon et avec un niveau la hauteur souhaitée Y du mirroir.
  • Seite 9 Boor de gaten (ø 8 mm). Drill the holes (ø 8 mm). Percer les trous (ø 8 mm). ø 8 mm Bohren Sie die Löcher (ø 8 mm). Steek de pluggen in de gaten en bevestig de ophangbeugels met de schroeven.
  • Seite 10 Hang de spiegel op aan de ophanghaken. Place the mirror on the mounting brackets. Placer le miroir sur les supports. Setzen Sie den Spiegel auf die Halterungen.
  • Seite 12 Clou. Bath findings. Clou bv Thermiekstraat 1 NL-6361 HB Nuth T +31 (0)45 524 56 56 info@clou.nl www.clou.nl Looking for inspiration?

Diese Anleitung auch für:

Look at me cl/08.09.070.20