Installing The Wall Mount; Changing The Battery - Backer Centronic TimeControl TC4410-II Montage- Und Betriebsanleitung

Installing the wall mount

Wall holder
Wall holder
m o u n t i n g
plate
4 1
Unlocking

Changing the battery

2
3
• Before installing in the position re-
quired, check that the transmitter
and receiver are functioning prop-
erly.
• Fix the mount to the wall with the two
screws provided.
Note
Change the batteries within one
minute, ensuring that you do not
press any buttons during this
time.
1. Open the battery compartment
door.
2. Take out the batteries.
3. Insert the new batteries in the cor-
rect position.
4. Close the cover of the battery com-
partment
de
en
fr
nl
49