Backer Centronic TimeControl TC4410-II Montage- Und Betriebsanleitung Seite 43

SETTING
HOLIDAY (Holiday OFF/ON)
Note
The settings applies to all channels.
1. Press the MENU button.
2. To select the SETTING menu, press the + button until SETTING appears.
3. Press OK to confirm. HOLDAY ON/OFF appears.
4. The holiday function can be set to ON or OFF using the +/- buttons.
5. Confirm your selection by pressing OK.
6. The HOLIDAY function is now set.
7. For further programme settings in the SETTING menu, see below.
SETTING
INTERMEDIATE POSITION, VENTILATION/REVERSE, PROG END LIMIT
(Time/position programming)
Note
At first, use the channel selector button to select the desired channel
in operating mode.
SETTING HOLIDAY OFF
HOLIDAY ON
de
en
fr
nl
43