Programming - Backer Centronic TimeControl TC4410-II Montage- Und Betriebsanleitung

Assembly and Operating Instructions
Overview of menu
Note
At first, use the channel selector button to select the desired channel
in operating mode.
TIME/DATE
1. Press the MENU button until TIME/DATE appears.
2. To select further menus, press the +/- buttons.
3. Press the MENU button to switch to operating mode.
TIME/DATE (to set the time and date)
TIME/DATE
TIME
1. Press the MENU button until TIME/DATE appears.
2. By pressing OK, you get to the time menu level.
3. Now set the current time using the +/- buttons.
4. If the time is set correctly, confirm by pressing OK.
5. Repeat the above procedure for the settings YEAR, MONTH and DAY. TIME/
DATE appears.
6. Press the MENU button to switch to operating mode.
40

Programming

Operating mode
PROGRAMME
YEAR
M
SETTING
MONTH
TIME/DATE
FUNCTION
DAY