Contents; Safety Instructions - ALFRA TMH 50 Bedienungsanleitung

eN
dear customer,
Thank you for purchasing an ALFRA product. Please read these operation instructions closely before using
your device for the first time and keep them along with the enclosed Product Control Card for later reference.

saFety InstructIons

Dangers can occur when transporting loads by lifting devices due to improper handling and/or poor
maintenance, which may cause serious accidents with fatal physical injuries. Please read these operation
instructions closely and observe all safety instructions mentioned therein. Contact the manufacturer if you
have any questions.
!
always...
• activate the hand-operated liftingmagnet
completely
• activate the lifting magnet on metallic,
ferromagnetic materials
• use the entire magnetic surface for lifting
• lift on level surfaces
• check the magnetic holding force by shaking
when picking up the load
• clean the magnetic surface and keep it clear
of dirt, chips and welding sputter
• set the lifting magnet down gently to prevent
damage to the magnetic surface
• check the hazard area when pivoting the load
• respect the stated maximum load before pivoting
• inspect the magnetic surface and the entire
lifting magnet for damage
• follow the instructions in this operating manual
• instruct new operators to the safe use of
lifting magnets
• respect local, country-specific guidelines
• store in a dry place
People with cardiac pacemakers or other medical appliances may only use the
lifting magnet following approval by their physician.
!
never...
• lift round or arched objects
• exceed the stated maximum load
• lift loads over people
• lift more than one work piece at a time
• switch the lifting magnet off before setting
down the load safely
• allow the load to sway or bring to a sharp
and immediate stop
• lift loads exceeding the recommended
dimensions
• lift loads with cavities, cut-out openings
or drilled holes
• modify the lifting magnet or remove
operating labels
• use the lifting magnet if damaged or missing parts
• strain the underside of the magnet through
heavy impact or blows
• position yourself beneath the lifted load
• leave the load hanging unattended
• use the lifting magnet without having been
properly instructed
• use if you have not read and understood these
operating instructions completely
• use the lifting magnet to support, lift or
transport persons
• operate the lifting magnet in temperatures
higher than 60°C (140°F)
• expose to corrosive substances
11