GERATEK Monza KF6020R Bedienungsanleitung Seite 63

1. Disconnect the appliance from the
mains (fuse-box).
2. Take away the contamination.
3. Wipe the sensors with a damp
sponge or cloth.
4. Dry the sensors with kitchen paper.
5. Connect the appliance to the mains
again.
6. Trouble shooting
1. Switch off the entire appliance.
2. Disconnect the appliance from the mains (fuse box of your household power
supply).
3. Contact the shop you purchased the appliance at.
➢ Check the schedule below before you contact the shop you purchased the
appliance at.
C
➢ Break in the power supply.
➢ The sensors are locked.
➢ Liquid on the sensors.
➢ You used your fingertip.
C
ONTAMINATION OF THE CONTROL PANEL
E
MERGENCY MEASURES
AUSES
T
HE APPLIANCE CANNOT BE SWITCHED ON
T
HE SENSORS DO NOT RESPOND
T
HE SENSORS ARE DIFFICULT TO OPERATE
The appliance
automatically turn off. The sensors may
not work properly when they are wet.
Dry the control panel carefully before
you put it into operation again.
:
E
RROR
➢ Check
connected to the mains. Check the
household fuse box. Is there a power
failure at your place of residence?
➢ Unlock the sensors.
➢ Dry the sensors.
➢ Use the bottom of your top phalanx.
63
.
may beep
M
EASURES
.
that the appliance
.
.
and
is