Maintenance Instruction; Troubleshooting Guide - King Tony 9TYN143610AB Bedienungsanleitung

Operating instructions
Transmission jack's lifting: Step on the oil pump pedal
Transmission jack's lowering: rotate the pressure relief knob
knob, and the pressure relief valve will close automatically.
Transmission jack's movement: before moving lower the transmission jack to the lowest
position, and check whether the center of gravity of the load is centered and whether the
workpiece is placed stably

Maintenance Instruction

Check whether the parts of the transmission jack are oil leakage, deformation, damage, etc.
every day.
The moving parts of the transmission jack shall be lubricated regularly.
This product uses ISO 15#, ISO 22# hydraulic oil, or other hydraulic oil of the same grade. Do
not use brake fluid!
The hydraulic oil volume for different models are as follows:
9TYN143610AB : 1.2L
9TYN143606AB : 1.0L
9TYN143603AB : 0.7L
Professionals shall regularly inspect the transmission jack, check the wear of bracket, foot base
and wheels, check whether the seal kits are leaking and whether the safety valve is normal, and
confirm that all safety labels are intact, clear and easy to read.
The transmission jack with any form of damage, wear or abnormal operation shall be stopped
to use until it is repaired. If the manufacturer or supplier agrees to repair, it is recommended
that the manufacturer or supplier's authorized repair organization carry out the necessary repair.
Only use accessories and adapters provided by the manufacturer.

Troubleshooting guide

1. The jack cannot be lifted to the highest position: check and add hydraulic oil (see
maintenance instructions for details).
2. Poor oil pump (empty pump): check whether the exhaust rod is pulled out (see installation
instructions for details).
3. Lowering under load (not keeping pressure well): check whether the pressure relief knob is
closed tightly.
4
2
counterclockwise, release the
| EN |