Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
The "BioFleece" is a pump fed filter system that needs to be installed above water level. You
must ensure that the filter is installed level on a solid underground/support. Water can be
pumped directly from a water tank/pond with a submersible dirty water pump. The filtered
water can flow back directly into the tank/pond. Do not reduce the size of the return pipe (3)
as this will result in a reduced flow capacity. The safety overflow (4) can easily be connected
to the normal return pipe by means of a T-piece, or separately with a pipe connection direct
to the pond.
Various set up options are possible. See examples below:
1. Water can be pumped directly from a water tank/pond with a submersible dirty water
pump. The filtered water can flow back directly into the tank/pond:
2. Water can be pumped from a gravity fed pump vault/vortex/sieve filter. The filtered water
can flow back directly into the tank/pond:
2
Werbung
Inhaltsverzeichnis
