Care Instructions; Warranty - Fuxtec CTL950 Original Bedienungsanleitung

Original-Bedienungsanleitung FUXTEC CTL-950_de_en_fr_ ita_rev1
_________________________________________________________________________________
Please regularly check that all screws, rivets, bolts and other fastenings are tight.
–
– Do not use grease or oil for lubrication, but a silicone-based spray.
Too heavy a load, improper folding or the use of unauthorised accessories can damage or
–
destroy the wagon.
Never load more than 5 kg into the rear bag.
–
Store the folded wagon only in a well-ventilated place to prevent mould growth.
–
The textile parts may lose colour if exposed to heavy use over an extended period (e.g.
–
intensive sunlight); however, this does not constitute a reason for complaint.
– Do not use the wagon if parts are bent, worn or broken.
Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL
–
900.

4. Care instructions

The textiles of the wagon can be cleaned with a sponge and warm soapy water. Do not use any harsh
or abrasive cleaning agents (chlorine, etc.) to clean the textile cover, but only a light soap solution or
a special textile cleaning agent.
The plastic parts, as well as the chassis, should also be cleaned with a soap solution. After using the
wagon in rain or wet, always clean and dry the frame. If the fabric upholstery is soaked, allow the
wagon to dry in the upright or stretched state.
You should remove the wheels regularly and treat the axles and all articulated joints and
suspension with a silicone-based spray (no grease or oil). In this way, you can ensure that
your wagon runs smoothly and quietly and limit premature wear and tear. By taking care of
your wagon, make sure that no rust film is formed, as this is not a reason for complaint.

5. Warranty

This product is manufactured to the highest quality standards. When purchasing a new product, the
manufacturer grants the legal warranty of 24 months, beginning with the date of sale. The warranty
only covers defects which are due to material or manufacturing faults and the non-fulfilment of
guaranteed characteristics. When asserting the warranty, the original sales receipt with the date of
sale must be enclosed. Warranty repairs are carried out exclusively by FUXTEC GmbH. A warranty
claim exists only if the product is used as intended.
Excluded from the statutory warranty are all damages caused by the following events:
- Abuse, overloading or neglect.
- Commercial use (industry, trade, rental).
- Repairs by non-authorised services.
- Damage caused by external influences, foreign bodies, substances or accidents.
Wear parts are excluded from the warranty.
32