Assembly Of The Roofing - Fuxtec CTL950 Original Bedienungsanleitung

Original-Bedienungsanleitung FUXTEC CTL-950_de_en_fr_ ita_rev1
_________________________________________________________________________________

2.4 Assembly of the roofing

Step 1:
Pull the safety bolt as shown.
Step 2:
While holding the pulled out safety bolt, put the wheel
on the rear axle. When the wheel is in the desired
position, release the safety bolt.
Step 3:
Repeat the procedure for the 2nd rear wheel.
Step 1:
Remove the two pairs of roof bars from the transport
bag.
Step 2:
Join the bars of a pair along the middle retaining
rubber band.
Step 3:
Please place the attachments of the holding rods
diagonally on the telescopic rods - as shown in the
picture on the left.
24