Intended Use; Removing And Attaching The Protective Cover; Unfolding The Wagon - Fuxtec CTL950 Original Bedienungsanleitung

Original-Bedienungsanleitung FUXTEC CTL-950_de_en_fr_ ita_rev1
_________________________________________________________________________________

3. Intended use

3.1. Removing and attaching the protective cover

3.2 Unfolding the wagon

Step 1:
Place the wagon in front of you as shown.
Step 2:
Loosen the two safety clips on the lower part of
the wagon
Step 3:
Open the velcro and pull the protective cover
upwards.
To attach the protective cover, proceed in the
reverse order.
Step 1:
Loosen the safety clip.
Step 2:
Pull the wagon apart and lay the fabric over
the frame.
26