LG RT8DIH Serie Bedienungsanleitung Seite 75

Symptoms
The water container hose
or the drain hose is not
connected correctly.
Water leaks.
The door is closed while
laundry or foreign
substance is caught in the
door.
Clothes have Very large load or very
damp spots after small load. Single large
a Sensor Dry item such as a blanket or
programme. comforter.
The password for the
Wi-Fi that you are trying
to connect to is incorrect.
Mobile data for your
smartphone is turned on.
The wireless network
Your home
name (SSID) is set
appliance and
incorrectly.
smartphone is
not connected to
the Wi-Fi
The router frequency is
network.
not 2.4 GHz.
The distance between the
appliance and the router
is too far.
Reason
• Connect the water container hose or the drain
• Check if laundry or foreign substance is caught
• If items are too tightly packed or too sparse
• Large, bulky items such as blankets or
• To dry a few remaining damp items from a
• Find the Wi-Fi network connected to your
• Turn off the Mobile data of your smartphone
• The wireless network name (SSID) should be
• Only a 2.4 GHz router frequency is supported.
• If the distance between the appliance and the
Solution
hose correctly.
in the door before using the appliance. If water
leaks continuously, contact the LG Electronics
Customer Information Centre.
the sensor may have trouble reading the
dryness level of the load. Use a Timed Drying
programme for very small loads.
comforters can sometimes wrap themselves
into a tight ball of fabric. The outside layers will
dry and register on the sensors, while the inner
core remains damp. When drying a single
bulky item, it may help to pause the cycle once
or twice and rearrange the item to unwrap and
expose any damp areas.
very large load or a few damp spots on a large
item after a Sensor Dry programme has
completed, empty the lint trap, then set a
Timed Drying programme to finish drying the
item(s).
smartphone and remove it, then register your
appliance on LG SmartThinQ.
and register the appliance using the Wi-Fi
network.
a combination of English letters and numbers.
(Do not use special characters.)
Set the wireless router to 2.4 GHz and connect
the appliance to the wireless router. To check
the router frequency, check with your Internet
service provider or the router manufacturer.
router is too far, the signal may be weak and
the connection may not be configured correctly.
Move the location of the router so that it is
closer to the appliance.
EN
35