Panasonic FZ-VCBN131A Bedienungsanleitung Seite 4

Should the fuse need to be replaced please ensure that the replacement fuse has
a rating of 3 ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
A S A
If the plug contains a removable fuse cover you must ensure that it is refitted when
the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is
obtained. A replacement fuse cover can be purchased from your local dealer.
If the fitted molded plug is unsuitable for the socket outlet in your home then the
fuse should be removed and the plug cut off and disposed of safely.
There is a danger of severe electrical shock if the cut off plug is inserted into any
13-ampere socket.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (figures A
and B).
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may
differ from actual AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse and close or attach
the fuse cover.
Figure A Figure B
Fuse cover
India Only
Declaration of Conformity with the requirements of the E-Waste (Management)
Rules
The Product is in conformity with the requirements of the reduction of hazardous
substances of the E-Waste Rules.
The content of hazardous substance with the exemption of the applications listed in
SCHEDULE II of the E-waste Rules:
1. Lead (Pb) – not over 0.1 % by weight;
2. Cadmium (Cd) – not over 0.01 % by weight;
3. Mercury (Hg) – not over 0.1 % by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1 % by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1 % by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1 % by weight.
4