Philips Senseo HD6574 Bedienungsanleitung Seite 11

11 When the coffee is ready, remove the used coffee pod or pods. Simply lift the pod holder out of
the machine and empty it.
Caution: There may still be some hot water/coffee on the coffee pod or pods.
12 After use, press the on/off button to switch off the machine (Fig. 19).
Note: If you do not use the machine, it switches off automatically after 15 minutes to save energy.
Brewing recipes with fresh milk
With this SENSEO® coffee machine you can easily create one or two cups of perfect cappuccino, café
latte, latte macchiato or warm milk.
1 Make sure that the water reservoir is filled with fresh cold tap water.
Tip: Use fresh water every day.
2 Put the plug in an earthed wall socket.
3 Press the on/off button (Fig. 8). The on/off button flashes slowly while the water heats up.
Note: If the on/off button flashes rapidly, the water reservoir does not contain enough water for
brewing one cup of coffee.
4 Pull the lid lever upwards to open the lid. The lid opens automatically (Fig. 12).
5 If you want to make one cup of cappuccino, café latte or latte macchiato, place the 1-cup pod
holder in the machine (1). If you want to make two cups, put the 2-cup pod holder in the machine
(2) (Fig. 13). Make sure the pod holder is clean.
Note: For warm milk only, you do not have to place a pod holder in the machine. Proceed with step
7.
6 Place 1 coffee pod in the 1-cup pod holder (1) or place 2 coffee pods in the 2-cup pod holder (2).
Place the pod or pods properly in the center of the pod holder, with the convex side pointing
downwards. Press the pod or pods lightly into the pod holder (Fig. 14).
Note: Make sure that the coffee in the pod or pods is evenly distributed.
Caution: Never put normal ground coffee or use torn pods in the SENSEO® machine, as this
causes it to become blocked.
7 Close the lid (1) and lock the lever (2) (Fig. 15).
Warning: Make sure the lid is closed properly and the lid lever is locked before you
start brewing.
8 Slide the milk spout into the machine over the guiding rails on the coffee spout. The milk spout is
attached properly when you hear a click (Fig. 5).
9 Remove the lid from the milk container (Fig. 20).
10 Fill the milk container with cold milk (Fig. 21).
Tip: Use fresh semi-skimmed cow's milk directly from the fridge for the best frothing results.
Note: To prevent excessive steaming, make sure that there is enough milk in the milk container.
11 Place the lid on the milk container (Fig. 22).
12 Insert the connector of the milk tube into the milk spout (1). Insert the other end of the milk tube
into the milk container through the opening in the lid (2) (Fig. 23).
13 Place one cup or two cups under the spout openings (Fig. 16).
Note: You can adjust the height of the drip tray or remove the drip tray to be able to place higher
cups.
English 11