Philips Senseo HD6574 Bedienungsanleitung Seite 13

Cleaning the milk spout and the milk container
For a reliable performance of the milk spout and consistently good frothing results, it is important to
clean the milk spout, the milk tube and the milk container regularly and thoroughly. The milk spout
can be disassembled completely, which allows you to remove all milk residues from it.
Note: If you do not plan to froth milk again straight away, rinse the milk spout and milk tube within 30
minutes after use. After the last use of the day, clean the milk spout and milk tube thoroughly.
Rinsing after every use
1 Fill the milk container with clean water (Fig. 32).
2 Place the lid on the milk container. Insert the connector of the milk tube into the milk spout (1).
Insert the other end of the milk tube into the milk container through the opening in the lid (2) (Fig.
23).
3 Place an empty cup under the spout (Fig. 33).
4 Press the milk only button (Fig. 34).
5 The machine rinses all milk residues from the milk spout and milk tube with clean hot water.
Cleaning after last use of the day
Clean the milk tube, milk spout and milk container in the dishwasher or in hot water with some
washing-up liquid.
Note: Cleaning in the dishwasher is recommended.
1 Pull the milk tube out of the milk spout (Fig. 29).
2 To remove the milk spout from the machine, pull it towards you (Fig. 35).
3 Remove the top part of the milk spout from the bottom part by pulling it firmly.
4 Take out the frothing system (Fig. 37).
5 Open the spring to separate the parts (Fig. 38).
6 Remove the inside part of the frothing system by pulling it downwards (Fig. 39).
7 Remove the small lid by pulling it upwards (Fig. 40).
8 Clean the three disassembled parts of the milk spout in the dishwasher or with hot water and some
washing-up liquid (Fig. 41).
Reassembling the milk spout
1 Place the small lid back on the frothing system (Fig. 42).
2 Place the inside part back into the frothing system (Fig. 43).
3 Close the spring to lock the two parts together (Fig. 44).
4 Place the frothing system in the bottom part of the milk spout (Fig. 45).
5 Place the top part of the milk spout back onto the bottom part (Fig. 46).
Cleaning the machine and the coffee spout
1 Always unplug the machine before you clean it.
2 Clean the outside of the machine with a moist cloth.
3 Remove the coffee spout (Fig. 47).
4 Remove the top part of the coffee spout from the bottom part by pulling it firmly (Fig. 48).
5 Clean the coffee spout, the pod holders, the drip tray, the cup tray and the water reservoir in hot
water, if necessary with some washing-up liquid, or in the dishwasher (Fig. 50).
6 To prevent clogging, clean the pod holders regularly with hot water, some washing-up liquid and a
washing-up brush. If you have used the 2-cup pod holder to brew cappuccino or hot chocolate,
make sure to clean it thoroughly immediately after use to remove any milk residues.
English 13