Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The
manufacturer:
Herewith declares that the machine designated below complies with the relevant
essential safety and health requirements of the EC Machinery Directive 2006/42/EC
due to its design and construction.
Main designation:
Alternative accessories: EDER Flat Planer EPH-C
The following standards were used to implement the safety and health requirements
specified in the EC directives:
1. EN ISO 12100, Safety of machinery - General principles for design, risk
assessment and risk reduction
2. Centrifugal force test according to DIN EN 847-1, Machine tools for woodworking -
Safety requirements - Part 1: Milling and planing tools, circular saw blades
Internal measures have been taken to ensure that the serial production devices always
meet the requirements of the current EC directives and the standards applied.
Authorized person for the technical documentation: Michael Pögel
Wolfenbüttel, 10.05.2023
Ulrich Schrader, Managing Director
409003_00 | 05.2023
Declaration of conformity
Eder Mechanical Engineering GmbH
Schweigerstraße 6
38302 Wolfenbüttel
Germany
EDER Bark Stripper ESG-C
EDER Curved Planer ERH-C
EDER Contour Planer EKH-C
EDER Wire Brush ERB-C
EDER Groove Cutter ENF-C
EDER Bark Beetle Cutter EBF-C Serial no.: EBF-C001000
EDER Carving Cutter ESF-C
EDER Trough Cutter ETH-C
EDER Trough Cutter ETH-C-Mini Serial no.: ETH-CM01000
Supplement to the OI for attachments with chain drive
Serial no.: ESG-C001000
Serial no.: EPH-C001000
Serial no.: ERH-C001000
Serial no.: EKH-C001000
Serial no.: ERB-C001000
Serial no.: ENF-C001000
Serial no.: ESF-C001000
Serial no.: ETH-C001000
and following
EN
6
Werbung
Inhaltsverzeichnis
