Hands-Free Function; Volume Setting; Technical Data - fontastic Paso Bedienungsanleitung

GB

Hands-free function

A built-in microphone (2) makes the speaker suitable to be used as a
hands-free speaker for phone calls.
Note: High volume may cause feedback with the microphone. This
results in echo on the phone side, not on the speakerphone side.
Accept/end/reject calls
To answer an incoming call, press the Play/Pause button
To end a call in progress, press the Play/Pause button
To reject incoming calls, double click the Play/Pause button
Redial, press the Play/Pause button
dialed will be called again.
RGB lighting
Paso is equipped with 360° RGB lighting. Pressing the light/mode button
briefly changes the lighting mode.
M
By pressing the light/mode button
off.

Volume setting

Increase volume: Press the Volume+ button
desired volume is reached.
Decrease volume : Press the Volume- button
the desired volume is reached.
13
once.
once.
.
twice. The last number
twice the lighting is switched
M
repeatedly until the
repeatedly until

Technical data

• Features: BT speaker with TWS and 360° LED light, card reader,
speakerphone.
• Housing Material: ABS + Metal
• BT: 5.1
• Profiles: HSP/HFP/A2DP/AVRCP
• Audio decoding: MP3/WAV
• Speaker: 5W max / 4Ω
• Driver size: Φ52mm
• Frequency response: 50Hz-12kHz
• Sensitivity: +38±2dB
• Battery capacity: 600mAh
• Operating voltage: 3.0-4.2V
• Input for charging: 5VDC
• Charging port: USB Type-C
• Operating time: Up to 6 hours (70% volume)
• Charging time: 1.5 hours
• Standby time / Connected: 48 hrs.
• Weight: 215g
No liability is accepted for any damage which may occur through
improper operation.
If you require technical support, please contact our support team via
email at service@fontastic.eu.
GB
14