Pfannenberg CCE Standard-Serie Betriebs- Und Wartungsanleitung Seite 8

WARNING:
be followed by electric connections. Remove the caps inside the hydraulic fittings connection before to connect the
chiller to your device.
WARNING:
findings of solid particles in the hydraulic system might cause the loss of warranty.
Hydraulic connections. For the hydraulic connection please refer to the enclosed hydraulic plan. The flow rate
and the fluid circulation direction must be respected during connection in accordance with INLET-OUTLET
identification plates.
CAUTION:
Remove the caps inside the hydraulic fittings connection before to connect the chiller to your device.
Picture 3 –Hydraulic connection plate
70040-120_01-_-(CCE_Op._Manual_EN-DE-IT-ES-FR-RU).docx
Hydraulic connections are the first ones to be assembeled during installing operation, to
The chillers has been cleaned by means of specific cleaning products. The eventual
Connect hydraulic pipes before filling the tank (as described in the start-up procedure).
Example of Hydraulic connection plate
CCE 6101
CCE 6201
CCE 6301
English
Picture 4 –Hydraulic connection plate
CCE 6401
CCE 6501
CCE 6601
8