Installing The Camera; Setup Initial Menu - Abask J05Pro Bedienungsanleitung

1.2 Installing the Camera

1.Check if the memory card is in the camera.
2.Attach the suction cup bracket to the camera.
3. Plug the charging cable into the USB port on the suction
cup, and then plug the adapter into the cigarette lighter
socket of your car. Start the car and the camera will turn on
automatically.

1.3 Setup Initial Menu

1.The blinking red dot on the screen means the camera is
recording video, press OK button first to pause the
recording.
2. Press the MENU button twice to enter the system menu.
Please make the following initial settings.
1) Set the language. Press the RIGHT button to select the
language, press OK button to enter the setting. Press the
RIGHT or LEFT button to select the language, press OK
button to confirm and return to the system menu.
2) Set the date and time. Press the RIGHT key to select
the date and time, and press OK to enter the setting. Press
to the RIGHT or LEFT to adjust the number, press OK to
confirm and go to the next item. Press MENU button to
return to the system menu.
3) Format the memory card. Press the RIGHT button to
select format, press OK to enter the setting. Press the
RIGHT button to select OK, press OK to confirm the
formatting and return to the system menu.
3. Press MENU to return to the standby mode. Press the OK
button and the camera starts working.
2