Setting Up The Byko-Spectra Mini - Altana byko-spectra mini Betriebsanleitung

Setting Up the byko-spectra mini

Setting Up the byko-spectra mini
Place your byko-spectra mini on the table, desk,
or work surface where it is to be used. Before the
line cord is connected to a power source, check
the product specification plate on the rear of the
booth, to make certain that the electrical rating
matches the power supply.
Normally, the daylight source is used as the
primary source, and the Cool-White, TL84, or
Incandescent sources are used to check the
integrity of the color match.
11