Using The Battery Grip - Panasonic LUMIX DMW-BGS5 Bedienungsanleitung

You can use the digital camera without worrying about battery consumption.
Insert the DC Coupler into the Battery Grip, connect the AC Adaptor, and then
plug it into an electrical outlet.
Note
When the DC Coupler is being mounted, the DC Coupler cover opens, so the
0
structure ceases to be dust and splash resistant. Be careful not to allow sand,
dust and water etc. to adhere to or enter the structure. After use, check that
there is no foreign matter attached to the DC coupler cover, and close it firmly.
Also read the operating instructions for the AC Adaptor and DC Coupler.
0
Some optional accessories may not be available in some countries.
0

Using the Battery Grip

Operation of the dials, joystick and buttons on the Battery Grip is same as the
digital camera.
Read the operating instructions for your digital camera for details.
1
Turn the power switch of the digital
camera to [ON].
2
Turn the operation ON/OFF switch on
the Battery Grip to [ON].
Enables the operations of the dials, joystick
0
and buttons.
This cannot turn the power of the digital
0
camera ON/OFF.
Note
When the digital camera is held grasping on the grip, a button on the Battery
0
Grip may be pushed accidentally. In such case, turn the operation ON/OFF
switch of the Battery Grip to [OFF].
10
DVQX2100 (ENG)