Fasten the clip nuts on the right
and left sides of the microwave oven
at the level of the screw holes in the
EBA 2748.
Only for installing in a
18 1/2" (470 mm) high niche:
Mount the elevations under the
feet of the microwave oven.
en - Preparing the microwave oven
The front of the microwave oven
should be free of dust and grease
before the EBA 2748 is attached.
Clean the front of the microwave
oven, so that the adhesive strips
on the back of the EBA 2748 stick
permanently.
Remove the protective foil from the
adhesive strips at the back of the
EBA 2748.
Slide the EBA 2748 over the front of
the microwave oven and press down
the adhesive strips firmly.
Fasten the EBA 2748 additionally with
the screws in the clip nuts .
13