Grundig PS 4110 Bedienungsanleitung Seite 12

SAFETY AND SET-UP ______________________
Extreme conditions like hot and highly humid
■
environment or improper use of this appliance
may cause the batteries to leak which may
cause personal injury. If the batteries leak,
remove them with a cloth and dispose of
them in accordance with the applicable laws.
Prevent battery acid from coming into contact
with skin and eyes. If battery acid comes
into contact with your eyes, flush your eyes
thoroughly with plenty of water and consult a
physician immediately. If battery acid comes
into contact with your skin, wash the affected
area with plenty of water and soap.
Batteries are very dangerous if swallowed.
■
Please keep the batteries and this appliance
away from children at all times. If a battery is
swallowed, seek medical attention immedi-
ately.
The batteries should never be recharged or
■
reactivated in any way, nor should they be
thrown into a fire. Never allow the batteries to
come in contact with water.
If you do not plan to use the appliance for a
■
long period of time, then remove the batteries.
The appliance can get damaged if they leak.
If your scale does not function properly,
■
replace all batteries.
Batteries should not be disposed of together
■
with the household waste! Please dispose
of expired batteries in an environmentally
friendly way and according to the applicable
legal regulations.
Never use old and new batteries or batteries
■
of differing brands simultaneously.
Before disposing of the appliance, remove the
■
batteries.
When inserting batteries pay attention to the
■
polarity as indicated inside the battery com-
partment. Do not short-circuit the batteries.
The scale switches off automatically after 10
■
seconds once the measurement is complete.
When voltage of battery is down, the "Lo"
■
low battery warning will appear on the dis-
play. Replace the batteries with the new ones.
12 ENGLISH
Caution
The PS 4110 is a product for your well-being.
■
It is not a medical product. No medical recom-
mendations can be made on the basis of its
use or of the results displayed.
Your product is designed with complex algo-
■
rithms. Due to these algorithms, if an external
electromagnetic disturbance happens near
your device, it may affect your readings. In
such cases, first remove the electromagnetic
disturbance reason and repeat your mea-
surement. Under extreme electromagnetic
disturbance, your device will protect itself and
enter into protection mode. To turn back to
normal running mode, remove and replace
the battery of the product after removing the
disturbance.