Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Black & Decker BDCHD18 Bersetzt Von Den Originalanweisungen

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com.

Technical data

Voltage
V
DC
-1
No-load speed
Min
Max. torque
Nm
Chuck capacity mm
Max Drilling capacity
/
mm
Steel/Wood Masonary
Weight
kg
S010***400040
Charger
SSC-250040**
Input voltage V 100 - 240
AC
Output voltage V 8 - 20
DC
Current mA 400
Approx.
Hours 4 - 10
charge time
Battery BL1518
Voltage V 18
DC
Capacity Ah 1,5
Type
Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L ) 88 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 99 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Impact drilling into concrete (a
h, ID
Drilling into metal (a ) <2.8 m/s
h, D
0-400 / 0-1500
0.90 (with battery 1.30)
S018***800100
90599854**
SSC-200100**
220 - 240 230
8 - 20 18
1000 1000
1,5 - 4 1,5 - 4
BL2018 BL2518 BL4018
18 18 18
2,0 2,5 4,0
Li-Ion Li-Ion Li-Ion
2 2
) 13.4m/s , uncertainty (K) 1,5 m/s
2 2
, uncertainty (K) 1,5 m/s
(Original instructions)
The Supply of Machinery (Safety)
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
BDCHD18
These products conform to the following UK Regulations:
18
Electromagnetic Compatibility Regulations, 2016,
17.5/40
The Restriction of the Use of Certain Hazardous Substances
1-10
in Electrical and Electronic Equipment Regulations 2012, S.I.
10/25/10
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
BDC2A
The undersigned is responsible for compilation of the technical
90606845
file and makes this declaration on behalf of
230
18
2000
0.75 - 2

EC declaration of conformity

Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with Directives 2014/30/EU and
2011/65/EU. For more information, please contact Black
& Decker at the following address or refer to the back of
Declaration of conformity
Regulations 2008
BDCHD18 - Impact drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Black & Decker.
Director - Consumer Power Tools
Black & Decker UK, 270 Bath Road, Slough
MACHINERY DIRECTIVE
o
BDCHD18 - Impact drill
the manual.
ENGLISH
Ed Higgins
Berkshire, SL1 4DX
United Kingdom
10/08/2021
9