Herunterladen Inhalt Inhalt Diese Seite drucken

MO-EL INSECTIVORO 361 Gebrauch Und Wartung Seite 9

Vorschau ausblenden Andere Handbücher für INSECTIVORO 361:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
On the wall where you plan to mount the appliance, make sure
that the wall is solid or that you locate a stud to provide ad-
equate support for the screw and that no electric wires or water
pipes are passing through.
1. Included with your INSECTIVORO is a special mounting bracket E
for mounting the unit to the wall. Remove the plastic wall anchor
from the screw .
2. Using a 5/16-inch drill bit, drill a hole 1.5 inches into the wall. Insert
the plastic wall anchor into the hole. Next screw the wall mount-
ing screw into the anchor.
3. Once the screw is securely mounted into the wall, hang the IN-
SECTIVORO by hooking the indentation in the plastic on the upper
lip of the back of the appliance onto the bracket.
Before cleaning make sure that the INSECTIVORO is discon-
nected from the wall socket.
Before switching off the unit or before removing the filter or
opening the drawer, make sure there are no dangerous insects
still alive inside. In this case, keep the unit powered ON until
they die.
Empty and clean out the trap I every few days. To clean it pull it out,
empty into trash and wash with running water. Please use caution
when emptying the drawer; make sure the insects (especially sting-
ing insects) are inactive.
The INSECTIVORO is equipped with a patented drawer cover G that
closes when it is removed from the device and opens when it is
replaced. If you notice that useful insects have been captured (e.g.
honey bees), take out the drawer, place it in the open, slide open the
door L so that they can go free, and move away.
To clean the filter F, every few days pull on the tab and it will slide out
easily. Clean it under running water.
To clean the exterior, wipe off with a damp cloth. Do not immerse in
water. Do not use a solvent.
For maximum efficiency make a Technical Assistance Center replace
the bulbs every 2000 hours.The florescent ultraviolet bulbs in your
INSECTIVORO have been designed for maximum attraction to fly-
ing insects. Do not make replace the original Ultraviolet fluorescent
bulbs with normal lighting bulbs.
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Insectivoro 363Insectivoro 368

Inhaltsverzeichnis