Tripp Lite DDR1327SDFC-1 Benutzerhandbuch Seite 5

Assembly
3
Desk Installation
Note: min. desktop thickness=10 mm (.4")
max. desktop thickness=85 mm (3.3")
• Determine approximate location for mount, keeping
in mind display size, height adjustment and pitch/roll
requirements.
• Slip the desk mount assembly over the edge of desk so
that clamp fully contacts desk edge.
• Turn the knob to adjust the clamp to edge of desk and
secure it tightly.
4
Install Top VESA Plate Screws
M-C
M-A
M-B
5