Cleaning And Maintenance - Redmond RHB-2961 Bedienungsanleitung

CHOPPER
quickly chops meat, hard cheese, vegetables, herbs, garlic, hazelnuts
and walnuts
Continuous working time under load is 30 s
The recommended interval between starts is 5 min
Do not immerse the connection point of the attachment with the motor unit in the
processed products.
Do not use the appliance to grind coffee, cereals, beans and other particularly hard
products.
When working with a blender attachment and a whisk attachment, do not use the chop-
per bowl as a container. The axis at the bottom of the bowl may damage the attachment.
When using the chopper, hold the power button for no more than 3-5 seconds with
breaks of 1-2 seconds — this will allow controlling the chopping process of the product
better and avoid overheating of the engine
Protection system against overload and overheat
The appliance is equipped with an automatic shutdown system in case of overload and
overheating. If the motor stops unexpectedly during operation, unplug the appliance and allow
it to cool for 30 minutes. Once connected to the mains, the appliance will be ready for use.
III. CLEANING AND MAINTENANCE
A4
Refer to table (р. 6) for recommended cleaning methods for the various parts of
the appliance.
Do not use abrasive, chemically aggressive or other substances not recommended for
use with food-contact objects when cleaning the appliance.
When cleaning knives and blades, be careful — they are very sharp!
Transportation and Storage
Before repeated operation or storage completely dry all parts of the appliance. Store
the assembled appliance in a dry, ventilated place away from heating appliances and
direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.
10
IV. BEFORE CONTACTING THE SERVICE CENTER
Problem Possible cause
The appliance is not connected
to the mains
The appliance does not
turn on
Faulty electrical outlet
When chopping products
you feel a strong vibra­ Products are cut too large
tion of the appliance
The motor stopped dur­ Overload and overheating pro­
ing operation tection tripped
The appliance overheats during
During operation of the
operation
appliance there was a
foreign smell
Some parts of the appliance are
applied with a protective coating
If the problem persists, contact an authorized service center.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the ap­
plicable collection point for the recycling of electrical and electronic equip­
ment. Do not throw away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste but must
be collected separately. Municipal disposal of recyclable wastes is free of charge. The
owners of old appliances are required to bring it to a waste facility centre. With this
little extra effort, you can help to ensure that valuable raw materials are recycled and
pollutants are treated as appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU — concern­
ing used electrical and electronic appliances (waste electrical and electronic equipment
WEEE).
The guideline determines the framework for the return and recycling of used appli­
ances as applicable throughout the EU.
Solution
Connect the appliance to the
mains
Plug the appliance in to a
working outlet
Cut the products smaller
Follow the instructions in the
"Protection system against
overload and overheat" section
Reduce the time of continuous
operation, increase the inter­
vals between starts
The smell will disappear after
a few starts