Inhaltsverzeichnis
Werbung
Setting the Sub Codes
1. Press the
button until the code number starts to flash.
2. Press
or
Setting and Transmitting Call Tones
1. Press
button until call tone 'CA' appears. The current call tone setting flash.
2. Press
or
button to change and listen to the call tone. Press the PTT button to exit menu.
Voice Operated Transmission (VOX)
1. To activate VOX, press
2. Press
or
button to select the sensitivity level. Press the PTT button to exit menu.
L3 = High Sensitivity
L2 = Medium Sensitivity
L1 = Low Sensitivity
L0 = Turn Off VOX function
Dual Channel Monitor
With this feature enabled, you can scan current channel and another channel alternately.
1. Press
button until '2CH' appears on the display. The current setting (OF, 1-22) will flash.
2. Press
or
between Home Channel and Dual Watch Channel. To end Dual Watch mode, re-enter Dual Watch
menu to select the OFF setting. If you set the same channel and code as current channel, Dual
Watch does not work.
Keypad Tones
Press and hold the
Roger Tone
Press and hold the
to turn Roger Beep OFF .
Keypad Lock
1. To lock the radio, press and hold
2. To unlock the radio, press and hold
3. Repeat the step to unlock the device.
button to select code number. Press the PTT button to exit menu.
button until 'VOX' appears on the display. The current setting (0, 1-3) will flash.
to select channels. Press the PTT button to exit menu. The screen will alternate
button while turning the radio ON to switch the keypad tone ON/OFF.
button while turning the radio ON to turn the Roger Beep ON. Repeat the step
button until the key lock indicator
button until key lock indicator
icon on display appear.
icon on display disappear.
13
Werbung
Inhaltsverzeichnis
