Rear Panel Features And Controls - RCF SUB 702-AS MK3 Benutzerhandbuch

3. REAR PANEL FEATURES AND CONTROLS

1
STEREO FEMALE XLR INPUTS (BAL)�
2
LIMITER LED The amplifier has a built in limiter circuit to prevent amplifier
clipping or transducers overdriving� When the soft clipping circuit is
active the LED blinks orange� It is okay if the limit LED blinks occasionally�
If the LED blinks frequently or lights continuously, turn down the signal
level�
3
SIGNAL LED Signal led: the signal indicator lights green if there is signal
present on the main XLR input�
4
POWER LED This green led is ON when the speaker is connected to the
main power supply and the ON/OFF is in ON position�
5
MALE XLR SIGNAL/XOVER OUTPUT The output XLR connector provides
a loop trough for speakers daisy chaining (or provides a crossover output
when the crossover switch is pushed)�
6
VOLUME CONTROL Adjusts the amplifier volume�
7
LINK/XOVER OUT SWITCH The output link is flat when the switch is OFF
(the output signal is the same as the input signal), or is high passed when
the switch is ON (to connect a satellite speaker)�
8
XOVER SWITCH This switch sets the crossover frequency of the OUTPUT
SIGNAL at 80 Hz or 110 Hz�
9
PHASE SWITCH This switch reverses the phase of the output signal�
10
IEC AC SOCKETS The IEC AC socket provides the connections for the
power cord to the socket�
11
POWER MAIN SWITCH The power switch turns the AC power ON and
OFF�
WARNING! CAUTION! Loudspeaker connections
should be only made by qualified and experienced personnel
having the technical know-how or enough specific instructions (to
ensure that connections are made correctly) in order to prevent
any electrical danger�
To prevent any risk of electric shock, do not connect loudspeakers
when the amplifier is switched on�
Before turning the system on, check all connections and make
sure there are no accidental short circuits�
The entire sound system shall be designed and installed in
compliance with the current local laws and regulations regarding
electrical systems�
2
3
1
4
6
7
5
8
9
10 11
7