Unpacking The Appliance; Overview Of The Components - Clatronic MBG 3728 Bedienungsanleitung, Garantie

Unpacking the Appliance

1. Take the appliance out of its packaging.
2. Remove all the packaging material such as plastic foil,
filling material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the box.
4. In case of incomplete delivery or damage, do not operate
the appliance. Return it to your dealer immediately.
NOTE:
There may still be dust or production residues on the
appliance. We recommend to clean the appliance as
described under "Cleaning".

Overview of the Components /

Scope of Delivery
1 Operation indicator light
2 Temperature switch
3 Function switch
4 Time / main switch
5 Heating element
6 Glass door
7 Door handle
8 Grill rack
9 Baking tray / drip pan
10 Crumb tray
11 Removal tool for grill rack and baking tray
12 Revolving spit
12a Spit forks
13 Removal tool for revolving spit
No Illustration
Pizza stone
Controls
Top Control: Temperature Switch
• For convection, choose a temperature between 80 and
190 °C.
• For top and bottom heat, choose a temperature between
100 and 230 °C.
Centre Controls: Function Switch
OFF Off
Top heat and bottom heat
Top heat and bottom heat with convection
Top heat with convection
Top heat with revolving spit
Top and bottom heat with revolving spit and
convection
MBG3728_IM
Bottom Control: Time / Main Switch
Select an operating time of up to 90 minutes.
The oven is switched off at position OFF. The control lamp
is off.
Notes for Use
Before Initial Use
There is a protective layer on the heating element. To
remove this, operate the appliance for about 15 minutes
without any contents. Set the function switch to
NOTE:
Any smoke or smells produced during this procedure are
normal. Please ensure sufficient ventilation.
Electrical Connection
1. Make sure that the function switch is in the OFF position.
2. Check whether the mains voltage that you want to use
matches the one of the appliance. You will find the infor-
mation about this on the type plate.
3. Insert the plug in a duly installed protective contact
socket.
CAUTION: Overload
When using extension cords, these should have a cable
cross-section of at least 1.5 mm².
Removal Tool (11 / 13)
a) To remove the baking tray
b) To remove the grill rack
If you want to remove the revolving
spit, use the removal tool (13).
CAUTION:
• The removal tools are not suitable for getting the pizza
stone out of the appliance. The pizza stone could be
damaged.
• To take the hot pizza stone out of the appliance, please
use oven mitts.
Operation
WARNING:
• Never use containers made from plastic, cardboard,
paper, or similar. Risk of fire!
• Do not use roasting bags or glass containers. These
may burst.
• Also, when using the handles for the baking sheet or
the revolving spit, protect yourself from the heat by
using gloves or pot cloths.
CAUTION:
Do not overload the baking tray and the grill rack!
(max. 3,5 kg)
.
37
19.10.18