Cautions When Attaching The Fan Guard - BALMUDA GreenFan Cirq EGF-3300 Serie Bedienungsanleitung

English
For your safety: "Cautions when attaching the Fan Guard"
For safety reasons, the product includes an Open-Shut Sensor which turns off the power
when the Fan Guard is removed. When re-attaching the Fan Guard after maintenance etc.,
if the Fan Guard is not properly attached and a gap exists between the Guard and the body,
the power will not turn on.
When attaching the Fan Guard, follow the instructions and diagram below, and make
sure the Fan Guard is correctly attached to the body.
1 Line up the position of the pawls on the
top of the Fan Guard with the holes on
the top of the body and attach to it.
Fan Guard
Using the pawls on top of the Fan Guard
2
as a pivot attach securely to the main unit
without leaving any gaps.
3 Slide the sliding lock to the "LOCK"
positionand attach the Fan Guard
securely to the body.
15
Line up the "pawls on the Fan Guard" with
the "holes on the body".
탭을
Eliminate gaps between the Fan Guard and
the body of the fan.
* If there is a gap between the Fan Guard and the body, the Open-
Shut Sensor will react and the power will not turn on.
When in use, the sliding lock should be set to the
"LOCK" position. Also, after "LOCK" is engaged,
depress the operation lever.
Guard lock lever
Lift the "guard lock lever" up, while moving the
"sliding lock" firmly into the "LOCK" position.
Top of the Fan Guard
Top of the body
Operation lever
Sliding lock