Operating Time - Makita MR003GZ Betriebsanleitung

also void the Makita warranty for the Makita tool
and charger.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.

OPERATING TIME

* The suitable battery packs for this radio listed as the following table.
* The following table indicates the operating time on a single charge.
Battery
CXT (10.8V -
capacity
12V max)
BL1015
BL1016
1.5Ah
BL1020B
BL1021B
2.0Ah
2.5Ah
3.0Ah
BL1040B
BL1041B
4.0Ah
5.0Ah
6.0Ah
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire.
NOTE:
● Table regarding to the battery operating time above is for reference.
● The actual operating time may differ with the type of the battery, charging condition, or usage environment.
Battery cartridge voltage
LXT (14.4V) LXT (18V)
BL1415N
BL1815N
BL1820B
BL1430B
BL1830B
BL1440
BL1840B
BL1450
BL1850B
BL1460B
BL1860B
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F). Let a hot battery cartridge
cool down before charging it.
4. When not using the battery cartridge, remove it from
the tool or the charger.
5. Charge the battery cartridge if you do not use it for a
long period (more than six months).
XGT (36V -
40V max)
BL4020
BL4025
BL4040
7 ENGLISH
AT SPEAKERS OUTPUT = 100mW
Unit: Hour (Approximately)
9.5
8.0
8.5
12.5
11.0
17.0
21.0
13.0
16.0
23.5
21.0
22.0
34.0
26.0
29.0
28.0
35.0