Panel Description - iDance GROOVE 540 Bedienungsanleitung

1
2 3 4 5 6 7
10
8 9
11
19
18
20 21
22

Panel Description:

1. USB/MICRO SD (MICRO SD (TF)) Card player:
Insert USB/MICRO SD (MICRO SD (TF)) Card drive
with MP3 file to this port.
2. MODE: It is for switching between different audio
source – Mini jack LINE-IN / Bluetooth audio / MP3
player
3. REC: Record button to enter record / record
playback mode, see next page for detail operation
4. REPEAT: press to switch repeat mode (one/all)
5. PREVIOUS: press to switch previous song in USB/
12
MICRO SD (TF) MP3 mode.
6. PLAY/PAUSE: Press to play/pause USB/MICRO
SD (TF) MP3 player music
13
7. NEXT: press to switch previous song in USB/
MICRO SD (TF) MP3 mode.
AUX IN (external audio interface): RCA stereo
8.
14
input for connecting external audio devices. You
may connect your Mixer/DJ console as external
music source with a RCA cable.
15
AUX OUT (external audio interface): RCA stereo
9.
output for connecting external audio loudspeaker.
16
You may connect Groove 540 to external power
amplifier / speaker with a bigger sound with a RCA
17
cable
10. MIC (Microphone input): Plug wired microphone
with ¼" jack to this socket
11. MIC PRI: Press this switch to turn on microphone
priority to have microphone voice volume over all
music sources for easy and smart announcement.
12. MIC. VOL: Turn the knob to adjust microphone
volume level.
13. ECHO (microphone echo): Turn the knob to adjust
microphone echo level. (Wired & Wireless Mic)
14. GUITAR VOLUME: Turn the knob to adjust guitar
volume level
15. TREBLE: Turn the knob to adjust master treble
level.
16. BASS: Turn the knob to adjust master volume
level.
17. MASTER VOL.: Turn the knob to adjust master
volume level.
18. ANT: Antenna for wireless microphone, please
ensure antenna is extended while microphone is in
operation.
19. 12V BATTERY IN (external 12V battery
interface): Connect external 12V charging/power
as alternative power source; please check carefully
the input polarity before connecting.
20. SPEAKER LED (switch): ON/OFF switch for
Groove 540's LED light show of woofer
21. POWER (power switch): main ON/OFF switch for
Groove 540
(Note: Battery charging is independent of Power
switch ON/OFF status)
22. AC INPUT: Connect AC100~240V 50/60Hz mains
power to this socket with the included power cord.
NOTE:
The internal lithium ion battery will be charged when either DC Input
/ 12V Battery input is connect
The LED indicators at the back panel indicate whether the battery is
in charging or Full.
ENGLISH