benon B2112 Bedienungsanleitung Seite 18

All manuals and user guides at all-guides.com
Debugging
Problem:
A remote controlled socket doesn't react to a remote.
Solution:
Make sure that the remote and the connected device are
properly installed and turned on.
Exchange the 12V/23 A-batteries of the remote. A low battery
voltage can decrease the area or reach of the wireless control.
Make sure that there is sufficient air circulation to avoid
overheating.
Make sure that the load current cannot exceed the maximum of
10 A (about 2300 W). If the load current exceeds the maximum,
seperate the device immediately from the remote controlled
socket.
In case the remote controlled socket still doesn't react, reset it
and program it anew.
- 18 -