All manuals and user guides at all-guides.com
Resetting a remote
controlled socket
To reset a linkage between a remote
controlled socket and a remote:
1.
Seperate the connected device from the
remote controlled socket.
2.
Pull the remote controlled socket out of
the socket.
3.
Press and hold the program button.
4.
Keep holding the program button and
connect the remote controlled socket
with the socket again.
5.
Resetting the remote controlled socket
was successful, if the indicator light
starts blinking. After blinking repeatedly,
the device's light goes out.
- 17 -
press and hold