benon B2112 Bedienungsanleitung Seite 16

All manuals and user guides at all-guides.com
Programming a remote
controlled socket
1. Seperate the connected device from the
remote controlled socket.
2. Press and hold the program key when
the remote controlled socket is plugged
in, until the indicator light starts blinking.
3. Release the programm button.
Press and hold the "ON" or "OFF" button
for the desired number on the remote.
The desired number will now be assigned
to the remote controlled socket.
4. The indicator light on the remote
controlled socket stops blinking, if the
assignment was successful. The remote
controlled socket is now programmed.
PLEASE NOTE:
By repeating the programming, you
can assign up to 10 remote controlled
sockets to a single number on your
remote. This way, various devices can
be regulated at the same time with one
keystroke.
- 16 -