Specification; Before You Begin - CombiSteel 7505 Serie Gebrauchsanweisung

1. Specification

1. Item No.: 7505.0020
2. Power Rate: 7000W
3. Voltage: 380-400V 3N~ 50/60Hz
4. Power line connection: 5G1.5mm2

2. Before you begin

Read the following instructions in their entirety. Use proper cookware. Your cookware must be induction-ready.
Check your ventilation. Your induction cooker must have the proper ventilation in order to operate correctly.
There must be at least 25cm of space available under a mounted induction cooker. Cabinets housing the
induction cooker should have both vents & circulation fans installed. The inside temperature of the cabinet must
not exceed 32°C. Ensure that you have dedicated power to the installed location.
Refer to below Electrical Specifications.
Electrical connection or installation: User must make sure that all electrical appliances system connected to
ground wire fulfilling present safety standards. The induction cooker must be installed by qualified personnel or
technicians.
Without connection to earth wire or incorrect installation may cause serious damage (hurt or electric shock).
Even though these cases rarely happen，the technicians have to install an electric protection air switch to meet
the safety standards. The manufacturer and distributors has no responsibility for the damages caused by
incorrect installation.
The installer must ensure the correct electrical connection and compliant with safety regulations. The cable must
not be bent or compressed. The cable must be checked regularly and replaced by authorized technicians only.
When the cable is connected to electrical power, the earth wire must be longer than other wires, connected at
the first, and disconnected finally.
www.combisteel.com
4