Superior SP120 Anleitung Seite 8

- Align the slots in the connector [2] with the
holes to be found in the rear panel and fasten
the connector using the self-tapping screws [6]
provided in the kit. (Fig. 4)
- Using the hose, connect up the connector and the
elbow already fastened to the appliance, locking
them in place with the hose clip [5] provided in
the kit. (Fig. 5)
Check that the hose does not come into contact
with parts of the appliance that move during
operation.
- Refit the previously removed cladding in the
reverse order to removal.
- Connect the appliance to any fresh air intake.
3.2 SIDE CONNECTOR INSTALLATION
- Remove the right side panel, following
the instructions given under "REMOVING
THE CLADDING" in the instruction booklet
accompanying the product.
For an appliance with ceramic cladding, follow the
instructions given under "INSTALLATION" in the
cladding instruction booklet.
For best access to the product, also remove the
appliance right side panel as shown to the side.
- Now remove the primary air shutter [A] to be
found in the pipe on the right side of the stove,
having loosened the relative fastening screw.
(Fig. 1)
8
Fig. 4
2
Fig. 5
Fig. 1
H07027540 / DT2000900-03
6
DT2012523-00
B
A
DT2033754-0
5
DT2033755-0
DT2033751-0