Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IV) copying of mp3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB or SD/MMC card if press
the " Record " button (3). The operation procedures is same as CD encoding as stipulate on above, and the
system will switch to copying mode only if mp3 file being read.
Remark:
The system will store the file to USB source first if both USB and SD slot are being occupied by storage
-
media.
If press the " Record " button during playback of USB or SD source, the file will copy from USB to SD or
-
SD to USB.
-
B) Phono encoding
1)
Plug in the USB pen drive for recording (make sure it had enough empty space).
2)
Set the function button (6) to " Phono " position and then press the " record " button (3) directly.
3)
The LCD display (2) with show the word " USB " and flashing, after then display "
and flashing. Now the system is starting the encoding mode.
4)
Start playback at phono for the track which you want to record to USB or SD card.
5)
After finish of recoding, press and hold the " Record " button (3) until the LCD stop flashing and return
to " phono " mode.
C) Cassette encoding
1)
Plug in the USB pen drive for recording (make sure it had enough empty space).
2)
Set the function button (6) to " Tape " mode and then press the " record " button (3) directly.
3)
The LCD display (2) with show the word " USB " and flashing, after then display "
flashing. Now the system is starting the encoding mode.
4)
Start playback of cassette tape(at either deck 1 or 2) which the track you prepare to encoding to MP3
format.
5)
After finish of recoding, press and hold the " Record " button (3) until the symbol "
disappear and resume to " Tape " mode on LCD display (2).
D) file copy from USB to SD or reversal
The system allow to copy the files from the USB source to SD/MMC card by pressing the " Record " button
(3):
I) Copying 1 track (assume copy from SD card to USB mode)
5.
Perform normal playback of the track at SD/MMC card you want to copy,
6.
Press " Record " button (3) during the playback of the desire track, unit will display "
and flashing. Copying is performing now.
7.
After copying is completed, unit will stop playback automatically.
II) copying all tracks (assume copy from SD card to USB mode)
5.
Select " SD " mode and then insert the SD/MMC card you want to copy.
6.
After reading of card information is completed, press the " Record " button (3) and the unit will display
"
" & "
7.
After copying is completed, unit will stop automatically.
E) Encoding bitrate (by remote handset)
You can select the desired bitrate during encoding, the higher bit rate will generate better sound quality and
occupy more space of memory. The selectable range is from 32 / 64 /96 /128 / 192 / 256 kbps respectively
1) Set in " Phono " function (6) & remain stop mode.
2) Press the " Info " function and the LCD display (2) will show the default bitrate (128 kbps)
3) Press skip
or
4) Press again the " Info " to confirm the setting and the LCD display (2) will resume to " Phono " mode
F) Track separation (by remote handset)
You can divide the recording music from phono or tape to USB/SD track by trace during encoding. Every
time when press the "
or tape to USB/SD, the system will generate a new track and continuous the recording. The text " PHONO "
or " TAPE " at LCD display will flashing one time, it mean the unit is creating a new track successfully.
" and flashing. Copying is performing now.
buttons (13,24) to select the desire bitrate for encoding.
" (track separation) button once at remote handset during encoding from phono
" & "
"
" & "
" and
" & "
"
" & "
"
Werbung
Inhaltsverzeichnis
