Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not use the charger after it has been strongly hit, dropped or otherwise damaged. Entrust the
●
testing and potential repair to authorized service workshop.
Do not attempt to dismantle the charger. All repairs are to be made by an authorized service workshop.
●
Improper assembly of the charger may cause electric shock or ire.
Disconnect the charger from the power supply before any maintenance or cleaning activities are
●
commenced.
When the charger is not in use, it should be disconnected from the power network.
NOTE! The tools is intended for indoor works.
Despite using the construction, which is safe by design itself, protection means and additional safety
features, there is always a residual risk of injuries during operation.
CONSTRUCTION AND APPLICATION
Cordless screwdriver can be used with many driver tips and bits of various lengths with hexagonal shanks
of 6.35 mm (1/4") in size. The tool is designed mainly as a screwdriver, it can also be used with sockets and
drills with hexagonal shanks (6.35 mm) for light drilling works (e.g. making of pilot holes).
Cordless, battery-powered power tools are especially useful for works in interior furnishing, adaptation of
premises etc.
The power tool should be used according to its purpose.
DESCRIPTION OF GRAPHIC PAGES
The below list refers to device components shown in the graphic pages of this instruction manual.
1.
Tool chuck:
2.
Handle lock
3.
Charging indicator (LED)
4.
Charger socket
5.
Speed direction switch
6.
Switch
7.
Lighting button
8.
Lighting (LED)
* There can be diferences between the drawing and real product.
DESCRIPTION OF USED GRAPHIC SIGNS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1.
Charger
2.
Screwdriver bits
3.
Screwdriver bit adapter
BATTERY CHARGING
The screwdriver is supplied with a partially charged battery. It is recommended to charge it for 5 hours for
the irst time. The battery should be charged in ambient temperatures ranging from 4°C to 40°C.
● Insert the charger cord plug into the charging socket (4) in the screwdriver casing (ig. A).
Connect the charger to a mains socket of 230V AC.
●
- 1 pcs
- 18 pcs
- 1 pcs
PREPARATION FOR WORK
12
Werbung
Inhaltsverzeichnis
